How to Setup Syndicate Masternode Windows

This tutorial will illustrate how to create & manage multiple Masternodes from a single controller wallet. Although this
tutorial outlines a few additional steps, they will make everything a bit less confusing now & in the long run.
In order to create a Masternode, we need to send EXACTLY 5000 SYNX to the Masternode address from an address THAT
HAS NOT BEEN PREVIOUSLY USED TO PAY FOR A MASTERNODE. In this tutorial we will be creating 3 Masternodes to be
managed from a single controller wallet, but this method can be extrapolated for additional Masternodes.

Lets start with our Masternode controller’s wallet Syndicate.conf file, it should be outlined as follows:

rpcuser=YOUROWNUSERNAME
rpcpassword=REALLYSTRONGASSWORD

rpcallowip=127.0.0.1
rpcport=22348
port=22349
server=1
listen=0
daemon=1
logtimestamps=1
mnconflock=0

We will be using prepayment address’ to keep track of which address’ have paid for Masternodes & to ensure we send

EXACTLY 5000 SYNX from a single input without issue.

1. Backup Wallet
2. Enable coin control

⦁ From the options menu, navigate to the display tab & check the box marked Display coin control features

3(a) getnewaddress MN1prepayment
⦁ SgNAV5TCus4RQEJkcDFRbEUHsLvXHHnyxY
3(b) getnewaddress MN2prepayment
⦁ SYV3QLnQCHjqeecHf7fzXkU1C1LA2JJzQU
3(c) getnewaddress MN3prepayment
⦁ SfoVEgiMZ2L3vdkR21Pkffr8tPDDg6yZ7o

4(a) Send atleast 5000 SYNX to MN1prepayment

  • Navigate to the Send Coins tab
  • Select unused address’ to create a payment of atleast 5000 SYNX
  • Paste the MN1prepayment address & click send
  • Wait for 10 confirms

4(b) Send atleast 5000 SYNX to MN2prepayment

  • Navigate to the Send Coins tab
  • Click inputs
  • Select unused address’ to create a payment of atleast 5000 SYNX
  • Paste the MN2prepayment address & click send
  • Wait for 10 confirms

4(c) Send atleast 5000 SYNX to MN3prepayment

  • Navigate to the Send Coins tab
  • Click inputs
  • Select unused address’ to create a payment of atleast 5000 SYNX
  • Paste the MN3prepayment address & click send
  • Wait for 10 confirms

5(a) masternode genkey

  • 68yNH3HrV63pbavsXKHjc5u6RqAuo8ftap55H22Ag74j26p7tJW

5(b) masternode genkey

  • 694m1UyqZyZdqmjK3LrdyuThQ5RjeJ5h3ZYZwAiRMZvEEf9Qjtr

5(c) masternode genkey

  • 69P59hNg1HMXh2fRAFScW5DttdoaggjUgzAc83msoLUjWvr2Tz3
  • 6(a) getnewaddress Masternode1
    SghUEVo79kbgnnsGB2Z519MjkAKSAdEVCG
    6(b) getnewaddress Masternode2
    Sg83Sz5rxb5jkTXehjdWyZ8jxjJkvaPTxx
    6(c) getnewaddress Masternode3
    SbmN5smhArrfFgfCx5sSqyaGUTXVs4b88y

7(a) Using coin control, send EXACTLY 5000 SYNX to Masternode1

  • Navigate to the Send Coins tab
  • Click inputs
  • Check the box labeled MN1prepayment with a balance of 5000 SYNX
  • Paste Masternode1’s address in the send field & click send
  • Wait for 10 confirms

7(b) Using coin control, send EXACTLY 5000 SYNX to Masternode2

  • Navigate to the Send Coins tab
  • Click inputs
  • Check the box labeled MN2prepayment with a balance of 5000 SYNX
  • Paste Masternode1’s address in the send field & click send
  • Wait for 10 confirms
  • Paste Masternode2’s address in the send field & click send
  • Wait for 10 confirms

7(c) Using coin control, send EXACTLY 5000 SYNX to Masternode3

  • Navigate to the Send Coins tab
  • Click inputs
  • Check the box labeled MN3prepayment with a balance of 5000 SYNX
  • Paste Masternode3’s address in the send field & click send
  • Wait for 10 confirms

8. masternode outputs

⦁ “ad21d377bbd8f31b5a6030d0e01413926491977f4e86bbdbdf7a3dbee7dfe6ee” : “0”
⦁ c3b537bcb7b6d0ce43b48e57154b3306a616c6a93f6a3d1708a3a5b6f8aaf249″ : “0”
⦁ “c7a8623456e16da88d4bd496d0aa451ee89c6abe6deacf7a26c2caf335489693” : “0”

9. Backup wallet
10. Exit wallet

11. Navigate to your APPDATA folder
12. Create 3 new Syndicate folders
⦁ Syndicate2
⦁ Syndicate3
⦁ Syndicate4

13. Copy everything from your sync’d controller wallet’s Syndicate APPDATA folder EXCEPT your wallet.dat & Syndicate.conf

& paste into each new folder

14. Copy & paste the Syndicated.exe that was included with your wallet installer into each new folder

15. Each Syndicate.conf file in your 3 new folders MUST have a different RPCport & PORT from every other Syndicate.conf

16. Each Syndicate.conf in your new folders should be outlined similiarly as follows:

⦁ Folder Syndicate2’s .conf file
rpcuser=YOUROWNUSERNAME
rpcpassword=REALLYSTRONGASSWORD

rpcallowip=127.0.0.1
rpcport=22350
port=9999
server=1
listen=1
daemon=1
logtimestamps=1
mnconflock=1
masternode=1

masternodeaddr=XXX.XXX.XXX.XXX:9999

masternodeprivkey=68yNH3HrV63pbavsXKHjc5u6RqAuo8ftap55H22Ag74j26p7tJW

 

⦁ Folder Syndicate3’s .conf file
rpcuser=YOUROWNUSERNAME
rpcpassword=REALLYSTRONGASSWORD

rpcallowip=127.0.0.1
rpcport=22351
port=9998
server=1
listen=1
daemon=1
logtimestamps=1
mnconflock=1
masternode=1

masternodeaddr=XXX.XXX.XXX.XXX:9998

masternodeprivkey=694m1UyqZyZdqmjK3LrdyuThQ5RjeJ5h3ZYZwAiRMZvEEf9Qjtr

⦁ Folder Syndicate4’s .conf file
rpcuser=YOUROWNUSERNAME
rpcpassword=REALLYSTRONGASSWORD

rpcallowip=127.0.0.1
rpcport=22352
port=9997
server=1
listen=1
daemon=1
logtimestamps=1
mnconflock=1
masternode=1

masternodeaddr=XXX.XXX.XXX.XXX:9997

masternodeprivkey=69P59hNg1HMXh2fRAFScW5DttdoaggjUgzAc83msoLUjWvr2Tz3

17. Next we need to create a .bat file to start each Masternode instance simultaneously

⦁ Create a new text document
⦁ Do not copy these next 3 lines.

⦁ You will need to change YOURUSERNAME to your own personal windows username, your new Masternodes will not

run if you simply copy the following lines.

 

File –> Save As

⦁ Name it StartMasternodes.bat

⦁ Make sure you change the Save As Type from ” Normal Text File ” to ” All Files Types ” or your Masternodes will

not start

⦁ Save at the location of your choice

18. Start your wallet

19. Add your new Masternodes through the configuration menu

⦁ Click Masternodes
⦁ Click Create

Fill out all the information in the order you received it, It is crucial that what you enter here matches the

Syndicate.conf file from each of the new folders

20. Double click the StartMasternodes.bat you just created to start the remote Masternodes

21. Click Start-Many in the Masternodes tab
⦁ Click Masternodes
⦁ Switch to the My Masternodes tab

 

22. Verify your ports are open & Masternodes can be seen
⦁ Go to http://canyouseeme.org on your web browser

⦁ Enter port 9999

Leave a Reply

Your email address will not be published. Required fields are marked *